Packman Build Service PMBS

We truncated the diff of some files because they were too big. If you want to see the full diff for every file, click here.

Changes of Revision 6

makemkv.changes Changed

makemkv.spec Changed

makemkv-bin-1.17.7.tar.gz/bin/amd64/makemkvcon -> makemkv-bin-1.17.8.tar.gz/bin/amd64/makemkvcon Changed

makemkv-bin-1.17.7.tar.gz/bin/arm64/makemkvcon -> makemkv-bin-1.17.8.tar.gz/bin/arm64/makemkvcon Changed

makemkv-bin-1.17.7.tar.gz/bin/armhf/makemkvcon -> makemkv-bin-1.17.8.tar.gz/bin/armhf/makemkvcon Changed

makemkv-bin-1.17.7.tar.gz/bin/i386/makemkvcon -> makemkv-bin-1.17.8.tar.gz/bin/i386/makemkvcon Changed

makemkv-bin-1.17.7.tar.gz/src/share/blues.jar -> makemkv-bin-1.17.8.tar.gz/src/share/blues.jar Changed

makemkv-oss-1.17.7.tar.gz/autoxxx/config.guess -> makemkv-oss-1.17.8.tar.gz/autoxxx/config.guess Changed

@@ -1,12 +1,14 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright 1992-2018 Free Software Foundation, Inc.
+#   Copyright 1992-2022 Free Software Foundation, Inc.
 
-timestamp='2018-02-24'
+# shellcheck disable=SC2006,SC2268 # see below for rationale
+
+timestamp='2022-01-09'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
+# the Free Software Foundation, either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -27,11 +29,19 @@
 # Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
 #
 # You can get the latest version of this script from:
-# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+# https://git.savannah.gnu.org/cgit/config.git/plain/config.guess
 #
 # Please send patches to <config-patches@gnu.org>.
 
 
+# The "shellcheck disable" line above the timestamp inhibits complaints
+# about features and limitations of the classic Bourne shell that were
+# superseded or lifted in POSIX.  However, this script identifies a wide
+# variety of pre-POSIX systems that do not have POSIX shells at all, and
+# even some reasonably current systems (Solaris 10 as case-in-point) still
+# have a pre-POSIX /bin/sh.
+
+
 me=`echo "$0" | sed -e 's,.*/,,'`
 
 usage="\
@@ -50,7 +60,7 @@
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright 1992-2018 Free Software Foundation, Inc.
+Copyright 1992-2022 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -84,7 +94,8 @@
   exit 1
 fi
 
-trap 'exit 1' 1 2 15
+# Just in case it came from the environment.
+GUESS=
 
 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a
 # compiler to aid in system detection is discouraged as it requires
@@ -96,73 +107,90 @@
 
 # Portable tmp directory creation inspired by the Autoconf team.
 
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > "$dummy.c" ;
-	for c in cc gcc c89 c99 ; do
-	  if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
-	     CC_FOR_BUILD="$c"; break ;
-	  fi ;
-	done ;
-	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found ;
-	fi
-	;;
- ,,*)   CC_FOR_BUILD=$CC ;;
- ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
+tmp=
+# shellcheck disable=SC2172
+trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15
+
+set_cc_for_build() {
+    # prevent multiple calls if $tmp is already set
+    test "$tmp" && return 0
+    : "${TMPDIR=/tmp}"
+    # shellcheck disable=SC2039,SC3028
+    { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+	{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } ||
+	{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+	{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
+    dummy=$tmp/dummy
+    case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
+	,,)    echo "int x;" > "$dummy.c"
+	       for driver in cc gcc c89 c99 ; do
+		   if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
+		       CC_FOR_BUILD=$driver
+		       break
+		   fi
+	       done
+	       if test x"$CC_FOR_BUILD" = x ; then
+		   CC_FOR_BUILD=no_compiler_found
+	       fi
+	       ;;
+	,,*)   CC_FOR_BUILD=$CC ;;
+	,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+    esac
+}
 
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
 # (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+if test -f /.attbin/uname ; then
 	PATH=$PATH:/.attbin ; export PATH
 fi
 
 UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
 UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
-case "$UNAME_SYSTEM" in
+case $UNAME_SYSTEM in
 Linux|GNU|GNU/*)
-	# If the system lacks a compiler, then just pick glibc.
-	# We could probably try harder.
-	LIBC=gnu
+	LIBC=unknown
 
-	eval "$set_cc_for_build"
+	set_cc_for_build
 	cat <<-EOF > "$dummy.c"
 	#include <features.h>
 	#if defined(__UCLIBC__)
 	LIBC=uclibc
 	#elif defined(__dietlibc__)
 	LIBC=dietlibc
-	#else
+	#elif defined(__GLIBC__)
 	LIBC=gnu
+	#else
+	#include <stdarg.h>
+	/* First heuristic to detect musl libc.  */
+	#ifdef __DEFINED_va_list
+	LIBC=musl
+	#endif
 	#endif
 	EOF
-	eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`"
+	cc_set_libc=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
+	eval "$cc_set_libc"
 
-	# If ldd exists, use it to detect musl libc.
-	if command -v ldd >/dev/null && \
-		ldd --version 2>&1 | grep -q ^musl
-	then
-	    LIBC=musl
+	# Second heuristic to detect musl libc.
+	if  "$LIBC" = unknown  &&
+	   command -v ldd >/dev/null &&
+	   ldd --version 2>&1 | grep -q ^musl; then
+		LIBC=musl
+	fi
+
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	if  "$LIBC" = unknown ; then
+		LIBC=gnu
 	fi
 	;;
 esac
 
 # Note: order is significant - the case branches are not exclusive.
 
-case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
+case $UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION in
     *:NetBSD:*:*)
 	# NetBSD (nbsd) targets should (where applicable) match one or
 	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
@@ -174,12 +202,12 @@
 	#
 	# Note: NetBSD doesn't particularly care about the vendor
 	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
 	UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
-	    "/sbin/$sysctl" 2>/dev/null || \
-	    "/usr/sbin/$sysctl" 2>/dev/null || \
+	    /sbin/sysctl -n hw.machine_arch 2>/dev/null || \
+	    /usr/sbin/sysctl -n hw.machine_arch 2>/dev/null || \
 	    echo unknown)`
-	case "$UNAME_MACHINE_ARCH" in

makemkv-oss-1.17.7.tar.gz/autoxxx/config.sub -> makemkv-oss-1.17.8.tar.gz/autoxxx/config.sub Changed

@@ -1,12 +1,14 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright 1992-2018 Free Software Foundation, Inc.
+#   Copyright 1992-2022 Free Software Foundation, Inc.
 
-timestamp='2018-02-22'
+# shellcheck disable=SC2006,SC2268 # see below for rationale
+
+timestamp='2022-01-03'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
+# the Free Software Foundation, either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -33,7 +35,7 @@
 # Otherwise, we print the canonical config type on stdout and succeed.
 
 # You can get the latest version of this script from:
-# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+# https://git.savannah.gnu.org/cgit/config.git/plain/config.sub
 
 # This file is supposed to be the same for all GNU packages
 # and recognize all the CPU types, system types and aliases
@@ -50,6 +52,13 @@
 #	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
 # It is wrong to echo any other type of specification.
 
+# The "shellcheck disable" line above the timestamp inhibits complaints
+# about features and limitations of the classic Bourne shell that were
+# superseded or lifted in POSIX.  However, this script identifies a wide
+# variety of pre-POSIX systems that do not have POSIX shells at all, and
+# even some reasonably current systems (Solaris 10 as case-in-point) still
+# have a pre-POSIX /bin/sh.
+
 me=`echo "$0" | sed -e 's,.*/,,'`
 
 usage="\
@@ -67,7 +76,7 @@
 version="\
 GNU config.sub ($timestamp)
 
-Copyright 1992-2018 Free Software Foundation, Inc.
+Copyright 1992-2022 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -89,7 +98,7 @@
     - )	# Use stdin as input.
        break ;;
     -* )
-       echo "$me: invalid option $1$help"
+       echo "$me: invalid option $1$help" >&2
        exit 1 ;;
 
     *local*)
@@ -110,1223 +119,1186 @@
     exit 1;;
 esac
 
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo "$1" | sed 's/^$.*$-$^-*-^-*$$/\2/'`
-case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
-  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
-  knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
-  kopensolaris*-gnu* | cloudabi*-eabi* | \
-  storm-chaos* | os2-emx* | rtmk-nova*)
-    os=-$maybe_os
-    basic_machine=`echo "$1" | sed 's/^$.*$-$^-*-^-*$$/\1/'`
-    ;;
-  android-linux)
-    os=-linux-android
-    basic_machine=`echo "$1" | sed 's/^$.*$-$^-*-^-*$$/\1/'`-unknown
-    ;;
-  *)
-    basic_machine=`echo "$1" | sed 's/-^-*$//'`
-    if  "$basic_machine" != "$1" 
-    then os=`echo "$1" | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
+# Split fields of configuration type
+# shellcheck disable=SC2162
+saved_IFS=$IFS
+IFS="-" read field1 field2 field3 field4 <<EOF
+$1
+EOF
+IFS=$saved_IFS
 
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun234* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c123* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze*)
-		os=
-		basic_machine=$1
-		;;
-	-bluegene*)
-		os=-cnk
-		;;
-	-sim | -cisco | -oki | -wec | -winbond)
-		os=
-		basic_machine=$1
-		;;
-	-scout)
-		;;
-	-wrs)
-		os=-vxworks
-		basic_machine=$1
-		;;
-	-chorusos*)
-		os=-chorusos
-		basic_machine=$1
-		;;
-	-chorusrdb)
-		os=-chorusrdb
-		basic_machine=$1
-		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco6)
-		os=-sco5v6
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5)
-		os=-sco3.2v5
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.4-9*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v4-9*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5v6*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-udk*)
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*178)
-		os=-lynxos178
-		;;
-	-lynx*5)
-		os=-lynxos5
+# Separate into logical components for further validation
+case $1 in
+	*-*-*-*-*)
+		echo Invalid configuration \`"$1"\': more than four components >&2
+		exit 1
 		;;
-	-lynx*)
-		os=-lynxos
+	*-*-*-*)
+		basic_machine=$field1-$field2
+		basic_os=$field3-$field4
 		;;
-	-ptx*)
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'`
+	*-*-*)
+		# Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two
+		# parts
+		maybe_os=$field2-$field3

makemkv-oss-1.17.7.tar.gz/autoxxx/install-sh -> makemkv-oss-1.17.8.tar.gz/autoxxx/install-sh Changed

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2018-03-11.20; # UTC
+scriptversion=2020-11-14.01; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -69,6 +69,11 @@
 # Desired mode of installed file.
 mode=0755
 
+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
+backupsuffix=
 chgrpcmd=
 chmodcmd=$chmodprog
 chowncmd=
@@ -99,18 +104,28 @@
      --version  display version info and exit.
 
   -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
+  -C            install only if different (preserve data modification time)
   -d            create directories instead of installing files.
   -g GROUP      $chgrpprog installed files to GROUP.
   -m MODE       $chmodprog installed files to MODE.
   -o USER       $chownprog installed files to USER.
+  -p            pass -p to $cpprog.
   -s            $stripprog installed files.
+  -S SUFFIX     attempt to back up existing files, with suffix SUFFIX.
   -t DIRECTORY  install into DIRECTORY.
   -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
   CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
   RMPROG STRIPPROG
+
+By default, rm is invoked with -f; when overridden with RMPROG,
+it's up to you to specify -f if you want it.
+
+If -S is not specified, no backups are attempted.
+
+Email bug reports to bug-automake@gnu.org.
+Automake home page: https://www.gnu.org/software/automake/
 "
 
 while test $# -ne 0; do
@@ -137,8 +152,13 @@
     -o) chowncmd="$chownprog $2"
         shift;;
 
+    -p) cpprog="$cpprog -p";;
+
     -s) stripcmd=$stripprog;;
 
+    -S) backupsuffix="$2"
+        shift;;
+
     -t)
         is_target_a_directory=always
         dst_arg=$2
@@ -255,6 +275,10 @@
     dstdir=$dst
     test -d "$dstdir"
     dstdir_status=$?
+    # Don't chown directories that already exist.
+    if test $dstdir_status = 0; then
+      chowncmd=""
+    fi
   else
 
     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
@@ -301,22 +325,6 @@
   if test $dstdir_status != 0; then
     case $posix_mkdir in
       '')
-        # Create intermediate dirs using mode 755 as modified by the umask.
-        # This is like FreeBSD 'install' as of 1997-10-28.
-        umask=`umask`
-        case $stripcmd.$umask in
-          # Optimize common cases.
-          *23672367) mkdir_umask=$umask;;
-          .*00202 | .0202 | .02) mkdir_umask=22;;
-
-          *0-7)
-            mkdir_umask=`expr $umask + 22 \
-              - $umask % 100 % 40 + $umask % 20 \
-              - $umask % 10 % 4 + $umask % 2
-            `;;
-          *) mkdir_umask=$umask,go-w;;
-        esac
-
         # With -d, create the new directory with the user-specified mode.
         # Otherwise, rely on $mkdir_umask.
         if test -n "$dir_arg"; then
@@ -326,52 +334,49 @@
         fi
 
         posix_mkdir=false
-        case $umask in
-          *1235670-70-7)
-            # POSIX mkdir -p sets u+wx bits regardless of umask, which
-            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-            ;;
-          *)
-            # Note that $RANDOM variable is not portable (e.g. dash);  Use it
-            # here however when possible just to lower collision chance.
-            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-
-            trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-            # Because "mkdir -p" follows existing symlinks and we likely work
-            # directly in world-writeable /tmp, make sure that the '$tmpdir'
-            # directory is successfully created first before we actually test
-            # 'mkdir -p' feature.
-            if (umask $mkdir_umask &&
-                $mkdirprog $mkdir_mode "$tmpdir" &&
-                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
-            then
-              if test -z "$dir_arg" || {
-                   # Check for POSIX incompatibilities with -m.
-                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-                   # other-writable bit of parent directory when it shouldn't.
-                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-                   test_tmpdir="$tmpdir/a"
-                   ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
-                   case $ls_ld_tmpdir in
-                     d????-?r-*) different_mode=700;;
-                     d????-?--*) different_mode=755;;
-                     *) false;;
-                   esac &&
-                   $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
-                     ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
-                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-                   }
-                 }
-              then posix_mkdir=:
-              fi
-              rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
-            else
-              # Remove any dirs left behind by ancient mkdir implementations.
-              rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
-            fi
-            trap '' 0;;
-        esac;;
+	# The $RANDOM variable is not portable (e.g., dash).  Use it
+	# here however when possible just to lower collision chance.
+	tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+
+	trap '
+	  ret=$?
+	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+	  exit $ret
+	' 0
+
+	# Because "mkdir -p" follows existing symlinks and we likely work
+	# directly in world-writeable /tmp, make sure that the '$tmpdir'
+	# directory is successfully created first before we actually test
+	# 'mkdir -p'.
+	if (umask $mkdir_umask &&
+	    $mkdirprog $mkdir_mode "$tmpdir" &&
+	    exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+	then
+	  if test -z "$dir_arg" || {
+	       # Check for POSIX incompatibilities with -m.
+	       # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+	       # other-writable bit of parent directory when it shouldn't.
+	       # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+	       test_tmpdir="$tmpdir/a"
+	       ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+	       case $ls_ld_tmpdir in
+		 d????-?r-*) different_mode=700;;
+		 d????-?--*) different_mode=755;;
+		 *) false;;
+	       esac &&
+	       $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+		 ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+		 test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+	       }
+	     }
+	  then posix_mkdir=:
+	  fi
+	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+	else
+	  # Remove any dirs left behind by ancient mkdir implementations.
+	  rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+	fi
+	trap '' 0;;
     esac
 
     if
@@ -382,7 +387,7 @@
     then :
     else
 
-      # The umask is ridiculous, or mkdir does not conform to POSIX,

makemkv-oss-1.17.7.tar.gz/autoxxx/ltmain.sh -> makemkv-oss-1.17.8.tar.gz/autoxxx/ltmain.sh Changed

@@ -1,12 +1,12 @@
-#! /bin/sh
+#! /usr/bin/env sh
 ## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
-##               by inline-source v2014-01-03.01
+##               by inline-source v2019-02-19.15
 
-# libtool (GNU libtool) 2.4.6
+# libtool (GNU libtool) 2.4.7
 # Provide generalized library-building support services.
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996-2015 Free Software Foundation, Inc.
+# Copyright (C) 1996-2019, 2021-2022 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -31,8 +31,8 @@
 
 PROGRAM=libtool
 PACKAGE=libtool
-VERSION="2.4.6 Debian-2.4.6-9"
-package_revision=2.4.6
+VERSION="2.4.7 Debian-2.4.7-7~deb12u1"
+package_revision=2.4.7
 
 
 ## ------ ##
@@ -64,34 +64,25 @@
 # libraries, which are installed to $pkgauxdir.
 
 # Set a version string for this script.
-scriptversion=2015-01-20.17; # UTC
+scriptversion=2019-02-19.15; # UTC
 
 # General shell script boiler plate, and helper functions.
 # Written by Gary V. Vaughan, 2004
 
-# Copyright (C) 2004-2015 Free Software Foundation, Inc.
-# This is free software; see the source for copying conditions.  There is NO
-# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-
-# As a special exception to the GNU General Public License, if you distribute
-# this file as part of a program or library that is built using GNU Libtool,
-# you may include this file under the same distribution terms that you use
-# for the rest of that program.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# This is free software.  There is NO warranty; not even for
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Copyright (C) 2004-2019, 2021 Bootstrap Authors
+#
+# This file is dual licensed under the terms of the MIT license
+# <https://opensource.org/license/MIT>, and GPL version 2 or later
+# <http://www.gnu.org/licenses/gpl-2.0.html>.  You must apply one of
+# these licenses when using or redistributing this software or any of
+# the files within it.  See the URLs above, or the file `LICENSE`
+# included in the Bootstrap distribution for the full license texts.
 
-# Please report bugs or propose patches to gary@gnu.org.
+# Please report bugs or propose patches to:
+# <https://github.com/gnulib-modules/bootstrap/issues>
 
 
 ## ------ ##
@@ -139,9 +130,12 @@
 	  _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
 	fi"
 done
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# These NLS vars are set unconditionally (bootstrap issue #24).  Unset those
+# in case the environment reset is needed later and the $save_* variant is not
+# defined (see the code above).
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
 
 # Make sure IFS has a sensible default
 sp=' '
@@ -159,6 +153,26 @@
 fi
 
 
+# func_unset VAR
+# --------------
+# Portably unset VAR.
+# In some shells, an 'unset VAR' statement leaves a non-zero return
+# status if VAR is already unset, which might be problematic if the
+# statement is used at the end of a function (thus poisoning its return
+# value) or when 'set -e' is active (causing even a spurious abort of
+# the script in this case).
+func_unset ()
+{
+    { eval $1=; (eval unset $1) >/dev/null 2>&1 && eval unset $1 || : ; }
+}
+
+
+# Make sure CDPATH doesn't cause `cd` commands to output the target dir.
+func_unset CDPATH
+
+# Make sure ${,E,F}GREP behave sanely.
+func_unset GREP_OPTIONS
+
 
 ## ------------------------- ##
 ## Locate command utilities. ##
@@ -259,7 +273,7 @@
     rm -f conftest.in conftest.tmp conftest.nl conftest.out
   }
 
-  func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+  func_path_progs "sed gsed" func_check_prog_sed "$PATH:/usr/xpg4/bin"
   rm -f conftest.sed
   SED=$func_path_progs_result
 }
@@ -295,7 +309,7 @@
     rm -f conftest.in conftest.tmp conftest.nl conftest.out
   }
 
-  func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+  func_path_progs "grep ggrep" func_check_prog_grep "$PATH:/usr/xpg4/bin"
   GREP=$func_path_progs_result
 }
 
@@ -360,6 +374,35 @@
   s/\$^$_G_bs\$$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
   s/\n//g"
 
+# require_check_ifs_backslash
+# ---------------------------
+# Check if we can use backslash as IFS='\' separator, and set
+# $check_ifs_backshlash_broken to ':' or 'false'.
+require_check_ifs_backslash=func_require_check_ifs_backslash
+func_require_check_ifs_backslash ()
+{
+  _G_save_IFS=$IFS
+  IFS='\'
+  _G_check_ifs_backshlash='a\\b'
+  for _G_i in $_G_check_ifs_backshlash
+  do
+  case $_G_i in
+  a)
+    check_ifs_backshlash_broken=false
+    ;;
+  '')
+    break
+    ;;
+  *)
+    check_ifs_backshlash_broken=:
+    break
+    ;;
+  esac
+  done
+  IFS=$_G_save_IFS
+  require_check_ifs_backslash=:
+}
+
 
 ## ----------------- ##
 ## Global variables. ##
@@ -387,7 +430,7 @@
 # putting '$debug_cmd' at the start of all your functions, you can get
 # bash to show function call trace with:
 #
-#    debug_cmd='eval echo "${FUNCNAME0} $*" >&2' bash your-script-name
+#    debug_cmd='echo "${FUNCNAME0} $*" >&2' bash your-script-name
 debug_cmd=${debug_cmd-":"}
 exit_cmd=:
 
@@ -529,27 +572,15 @@
 # ---------------------
 # Append VALUE onto the existing contents of VAR.
 
-  # We should try to minimise forks, especially on Windows where they are
-  # unreasonably slow, so skip the feature probes when bash or zsh are
-  # being used:
-  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
-    : ${_G_HAVE_ARITH_OP="yes"}
-    : ${_G_HAVE_XSI_OPS="yes"}
-    # The += operator was introduced in bash 3.1
-    case $BASH_VERSION in
-      12.* | 3.0 | 3.0*) ;;
-      *)
-        : ${_G_HAVE_PLUSEQ_OP="yes"}
-        ;;
-    esac

makemkv-oss-1.17.7.tar.gz/configure -> makemkv-oss-1.17.8.tar.gz/configure Changed

@@ -1,9 +1,10 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for ffabi 0.
+# Generated by GNU Autoconf 2.71 for ffabi 0.
 #
 #
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation,
+# Inc.
 #
 #
 # This configure script is free software; the Free Software Foundation
@@ -14,14 +15,16 @@
 
 # Be more Bourne compatible
 DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+as_nop=:
+if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
   emulate sh
   NULLCMD=:
   # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
-else
+else $as_nop
   case `(set -o) 2>/dev/null` in #(
   *posix*) :
     set -o posix ;; #(
@@ -31,46 +34,46 @@
 fi
 
 
+
+# Reset variables that may have inherited troublesome values from
+# the environment.
+
+# IFS needs to be set, to space, tab, and newline, in precisely that order.
+# (If _AS_PATH_WALK were called with IFS unset, it would have the
+# side effect of setting IFS to empty, thus disabling word splitting.)
+# Quoting is to prevent editors from complaining about space-tab.
 as_nl='
 '
 export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\$.*\$"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
-	expr "X$arg" : "X\$.*\$$as_nl";
-	arg=`expr "X$arg" : ".*$as_nl\$.*\$"`;;
-      esac;
-      expr "X$arg" : "X\$.*\$" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
+IFS=" ""	$as_nl"
+
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# Ensure predictable behavior from utilities with locale-dependent output.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# We cannot yet rely on "unset" to work, but we need these variables
+# to be unset--not just set to an empty or harmless value--now, to
+# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh).  This construct
+# also avoids known problems related to "unset" and subshell syntax
+# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
+for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
+do eval test \${$as_var+y} \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+
+# Ensure that fds 0, 1, and 2 are open.
+if (exec 3>&0) 2>/dev/null; then :; else exec 0</dev/null; fi
+if (exec 3>&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
+if (exec 3>&2)            ; then :; else exec 2>/dev/null; fi
 
 # The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
+if ${PATH_SEPARATOR+false} :; then
   PATH_SEPARATOR=:
   (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
     (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
@@ -79,13 +82,6 @@
 fi
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""	$as_nl"
-
 # Find who we are.  Look in the path if we contain no directory separator.
 as_myself=
 case $0 in #((
@@ -94,8 +90,12 @@
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    test -r "$as_dir$0" && as_myself=$as_dir$0 && break
   done
 IFS=$as_save_IFS
 
@@ -107,30 +107,10 @@
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   exit 1
 fi
 
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 # Use a proper internal environment variable to ensure we don't fall
   # into an infinite loop, continuously re-executing ourselves.
@@ -152,20 +132,22 @@
 exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
 # Admittedly, this is quite paranoid, since all the known shells bail
 # out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
+printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
   fi
   # We don't want this to propagate to other subprocesses.
           { _as_can_reexec=; unset _as_can_reexec;}
 if test "x$CONFIG_SHELL" = x; then
-  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  as_bourne_compatible="as_nop=:
+if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
   emulate sh
   NULLCMD=:
   # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '\${1+\"\$@\"}'='\"\$@\"'
   setopt NO_GLOB_SUBST
-else
+else \$as_nop
   case \`(set -o) 2>/dev/null\` in #(

makemkv-oss-1.17.7.tar.gz/libdriveio/inc/lgpl/byteorder.h -> makemkv-oss-1.17.8.tar.gz/libdriveio/inc/lgpl/byteorder.h Changed

@@ -32,6 +32,10 @@
 
 #elif defined(_linux_)
 
+#ifndef __USE_MISC
+#define __USE_MISC 1	// for __bswap_xx
+#endif
+
 #include <endian.h>
 
 #define __bswap64(x)    __bswap_64(x)
@@ -70,6 +74,36 @@
 #define BYTEORDER_ARCH_ALLOWS_UNALIGNED_ACCESS 1
 #endif
 
+#if _BYTE_ORDER == _LITTLE_ENDIAN
+
+#define bswap_cpu_to_le64(x) (x)
+#define bswap_cpu_to_le32(x) (x)
+#define bswap_cpu_to_le16(x) (x)
+
+#define bswap_cpu_to_be64(x) __bswap64(x)
+#define bswap_cpu_to_be32(x) __bswap32(x)
+#define bswap_cpu_to_be16(x) __bswap16(x)
+
+#else
+
+#define bswap_cpu_to_be64(x) (x)
+#define bswap_cpu_to_be32(x) (x)
+#define bswap_cpu_to_be16(x) (x)
+
+#define bswap_cpu_to_le64(x) __bswap64(x)
+#define bswap_cpu_to_le32(x) __bswap32(x)
+#define bswap_cpu_to_le16(x) __bswap16(x)
+
+#endif
+
+#define bswap_le64_to_cpu bswap_cpu_to_le64
+#define bswap_le32_to_cpu bswap_cpu_to_le32
+#define bswap_le16_to_cpu bswap_cpu_to_le16
+
+#define bswap_be64_to_cpu bswap_cpu_to_be64
+#define bswap_be32_to_cpu bswap_cpu_to_be32
+#define bswap_be16_to_cpu bswap_cpu_to_be16
+
 #ifdef BYTEORDER_ARCH_ALLOWS_UNALIGNED_ACCESS
 
 // arch allows unaligned access
@@ -89,207 +123,208 @@
     return *(const uint64_t*)Data;
 }
 
-static inline void wr16ua(uint8_t* Data,uint16_t Value)
+static inline void wr16ua(uint8_t* Data, uint16_t Value)
 {
     *((uint16_t*)Data) = Value;
 }
 
-static inline void wr32ua(uint8_t* Data,uint32_t Value)
+static inline void wr32ua(uint8_t* Data, uint32_t Value)
 {
     *((uint32_t*)Data) = Value;
 }
 
-static inline void wr64ua(uint8_t* Data,uint64_t Value)
+static inline void wr64ua(uint8_t* Data, uint64_t Value)
 {
     *((uint64_t*)Data) = Value;
 }
 
-#else
-
-// true unaligned
+// inline big-endian access macros
 
-static inline uint16_t rd16ua(const uint8_t* Data)
+static inline uint16_t rd16be(const uint8_t* Data)
 {
-    uint16_t t;
-    if (0==(((unsigned int)(uintptr_t)(void*)Data)&1))
-    {
-        t = *(const uint16_t*)Data;
-    } else {
-        uint8_t* p = (uint8_t*)&t;
-        p0=Data0;
-        p1=Data1;
-    }
-    return t;
+    return bswap_cpu_to_be16(rd16ua(Data));
 }
 
-static inline uint32_t rd32ua(const uint8_t* Data)
+static inline uint32_t rd32be(const uint8_t* Data)
 {
-    uint32_t t;
-    if (0==(((unsigned int)(uintptr_t)(void*)Data)&3))
-    {
-        t = *(const uint32_t*)Data;
-    } else {
-        uint8_t* p = (uint8_t*)&t;
-        p0=Data0;
-        p1=Data1;
-        p2=Data2;
-        p3=Data3;
-    }
-    return t;
+    return bswap_cpu_to_be32(rd32ua(Data));
 }
 
-static inline uint64_t rd64ua(const uint8_t* Data)
+static inline uint64_t rd64be(const uint8_t* Data)
 {
-    uint64_t t;
-    if (0==(((unsigned int)(uintptr_t)(void*)Data)&7))
-    {
-        t = *(const uint64_t*)Data;
-    } else {
-        uint8_t* p = (uint8_t*)&t;
-        p0=Data0;
-        p1=Data1;
-        p2=Data2;
-        p3=Data3;
-        p4=Data4;
-        p5=Data5;
-        p6=Data6;
-        p7=Data7;
-    }
-    return t;
+    return bswap_cpu_to_be64(rd64ua(Data));
 }
 
-static inline void wr16ua(uint8_t* Data,uint16_t Value)
+static inline void wr16be(uint8_t* Data,uint16_t Value)
 {
-    uint16_t t = Value;
-    const uint8_t* p = (uint8_t*)&t;
-
-    Data0=p0;
-    Data1=p1;
+    wr16ua(Data, bswap_cpu_to_be16(Value));
 }
 
-static inline void wr32ua(uint8_t* Data,uint32_t Value)
+static inline void wr32be(uint8_t* Data,uint32_t Value)
 {
-    uint32_t t = Value;
-    const uint8_t* p = (uint8_t*)&t;
-
-    Data0=p0;
-    Data1=p1;
-    Data2=p2;
-    Data3=p3;
+    wr32ua(Data, bswap_cpu_to_be32(Value));
 }
 
-static inline void wr64ua(uint8_t* Data,uint64_t Value)
+static inline void wr64be(uint8_t* Data,uint64_t Value)
 {
-    uint64_t t = Value;
-    const uint8_t* p = (uint8_t*)&t;
-
-    Data0=p0;
-    Data1=p1;
-    Data2=p2;
-    Data3=p3;
-    Data4=p4;
-    Data5=p5;
-    Data6=p6;
-    Data7=p7;
+    wr64ua(Data, bswap_cpu_to_be64(Value));
 }
 
-#endif
-
-#if _BYTE_ORDER == _LITTLE_ENDIAN
-
-#define bswap_cpu_to_le64(x) (x)
-#define bswap_cpu_to_le32(x) (x)
-#define bswap_cpu_to_le16(x) (x)
-
-#define bswap_cpu_to_be64(x) __bswap64(x)
-#define bswap_cpu_to_be32(x) __bswap32(x)
-#define bswap_cpu_to_be16(x) __bswap16(x)
+// inline little-endian access macros
 
-#else
+static inline uint16_t rd16le(const uint8_t* Data)
+{
+    return bswap_cpu_to_le16(rd16ua(Data));
+}
 
-#define bswap_cpu_to_be64(x) (x)
-#define bswap_cpu_to_be32(x) (x)
-#define bswap_cpu_to_be16(x) (x)
+static inline uint32_t rd32le(const uint8_t* Data)
+{
+    return bswap_cpu_to_le32(rd32ua(Data));
+}
 
-#define bswap_cpu_to_le64(x) __bswap64(x)

makemkv-oss-1.17.7.tar.gz/libffabi/src/ffabi.c -> makemkv-oss-1.17.8.tar.gz/libffabi/src/ffabi.c Changed

makemkv-oss-1.17.7.tar.gz/makemkvgui/inc/ver_num.h -> makemkv-oss-1.17.8.tar.gz/makemkvgui/inc/ver_num.h Changed

makemkv-oss-1.17.7.tar.gz/makemkvgui/src/regbox.cpp -> makemkv-oss-1.17.8.tar.gz/makemkvgui/src/regbox.cpp Changed